Our Online Parts Store Is Now Open →

Our Online Parts Store Is Now Open →

Let’s work together!

Repair, Replace, Restore.

Use the form below to order springs, re-string, and order.

A sales rep will reach out after reviewing your order/request before proceeding with the order.

Questions about how to install blinds yourself? Visit our Video Tutorial Library.

How to Measure
Tubes & Rails

Tag—On the top header mounting rail, it looks like a price tag, with 6 digits. (Pictured below) Measuring a top header rail—If the width is 1 3/8", then your tube is likely 1 1/4" outside diameter tube. If the header rail width is 1" your tube is most likely a 3/4" or 1" outside diameter tube. 

Measuring a tube—The outside diameter of the aluminum tube that the fabric is wrapped around. Pull the fabric down (do not remove the fabric from the tube if it's still attached) so you are not measuring the fabric, only the tube. (Pictured below) 

Close-up of two labels on a metal surface, one above the other. The top label shows "16.40.18 LB" and the bottom label shows "26.3812."

Irvine Standard numbers

Can be Repaired 

Clothing tag showing size 44x38, black color, made in China.

Import label

Can NOT be Repaired 

Close-up of a yellow measuring tape marked in inches, with the 1-inch mark aligned along the edge of a rail

1" Top Mounting Rail

Close-up of a yellow measuring tape.

1 3/8" Top Mounting Rail

Two angled metal tubes on a green cutting mat with yellow grid lines. The left tube is hollow, shiny, and appears to be aluminum, with a cut end showing internal ridges. The right tube is also aluminum, with a measuring tape across it indicating a length just over 1 inch.

1 1/4” Diameter

Close-up of a metal pipe being measured with a yellow measuring tape on a green cutting mat. The pipe is held in place with a metal clamp.

1” Diameter

Comparison of metal pipes with tape measure for size; left pipe is a half-round tube, right pipe is a complete round tube, both on a green cutting mat.

3/4” Diameter